|Place of origin||Armed Republic of Dvinmiste Capia|
|Used by||- - - - - - - - - - - - - - -|
|Designer||Anarchy Gun Works|
|Manufacturer||Anarchy Gun Works|
|Unit cost||$800 per unit|
|Weight||795 g (empty)|
|Barrel length||102 mm|
|Cartridge||15-Rounds detachable box magazine|
|Action|| - - - - - - - - - - - - - - -
|Rate of fire||800 RPM|
|Muzzle velocity||300 m/s|
|Effective range||45 m|
|Feed system||15-round box magazine|
|Sights||3-dot iron sights|
The Tyrus trigger guard is rounded for better concealed carry. The takedown pin of earlier models is replaced by a spring-loaded bar, accessed via frame recesses on both sides, which must be grasped and pulled down simultaneously to release the slide. The slide spring is doubly captive, being inserted approximately an inch into the transfer block at one end and a receiving hole in the front of the slide at the other. It is a self-contained assembly, completely captured by the polymer guide. The magazine holds the top round directly behind the barrel's breech end so only a slight feed ramp is needed. This allows the barrel to fully support the case. The 6-R rifling of the barrel generates counter-clockwise torque which is harnessed by the locking system to reduce the amount of pressure required from the rotating barrel lock's cam and pin system to effect unlocking. The steel transfer block's cam pin is 5 mm wide and 2 mm deep. The entire hammer unit mechanism can be removed from the Tyrus, without the use of special tools, as a single group. This allows easy access to the firing mechanism for cleaning. The Tyrus design makes it impossible to assemble incorrectly from a field-stripped takedown.
The Tyrus features an interchangeable, luminescent 3-dot sight system (coated in Super-LumiNova) for use in dark or low-light situations. With short exposure to any kind of light, the night sights' luminescence lasts up to 30 minutes. The weapon also incorporates a Picatinny rail under the muzzle to allow flashlights, laser sights, and other accessories to be attached. AGW discontinued the luminescent 3-dot nights sights for the Px4, replacing them with standard 3-dot sights.
Removable and interchangeable partsEdit
To aid the versatility of the Tyrus, a number of parts were designed to be removable and interchangeable. These parts include the backstrap, the magazine release button, the slide catch and the hammer unit mechanism. The backstrap is available in three sizes: slim, standard and oversized. The magazine release button can be mounted on either side of the weapon and replaced by one of three types: standard, large or combat (extended). The standard slide catch can be replaced with a slimmer version to avoid snagging when the weapon is drawn quickly from a holster.